CDMA2000 is a hybrid 2.5G / 3G technology of mobile telecommunications standards that use CDMA, a multiple access scheme for digital radio, to send voice, data, and signalling data (such as a dialed telephone number) between mobile phones and cell sites. CDMA2000 is considered a 2.5G technology in 1xRTT and a 3G technology in EVDO.
CDMA (code division multiple access) is a mobile digital radio technology where channels are defined with codes (PN sequences). CDMA permits many simultaneous transmitters on the same frequency channel, unlike TDMA (time division multiple access), used in GSM and D-AMPS, and FDMA, used in AMPS ("analog" cellular). Since more phones can be served by fewer cell sites, CDMA-based standards have a significant economic advantage over TDMA- or FDMA-based standards.
CDMA2000 has a relatively long technical history, and remains compatible with the older CDMA telephony methods (such as cdmaOne) first developed by Qualcomm, a commercial company, and holder of several key international patents on the technology.
The CDMA2000 standards CDMA2000 1xRTT, CDMA2000 EV-DO, and CDMA2000 EV-DV are approved radio interfaces for the ITU's IMT-2000 standard and a direct successor to 2G CDMA, IS-95 (cdmaOne). CDMA2000 is standardized by 3GPP2.
CDMA2000 is a registered trademark of the Telecommunications Industry Association (TIA-USA) in the United States, not a generic term like CDMA. (This is similar to how TIA has branded their 2G CDMA standard, IS-95, as cdmaOne.)
CDMA2000 is an incompatible competitor of the other major 3G standard UMTS. It is defined to operate at 450 MHz, 700 MHz, 800 MHz, 900 MHz, 1700 MHz, 1800 MHz, 1900 MHz, and 2100 MHz.
Below are the different types of CDMA2000, in order of increasing complexity:
Saturday, December 6, 2008
WiMAX
WiMAX, meaning Worldwide Interoperability for Microwave Access, is a telecommunications technology that provides for the wireless transmission of data using a variety of transmission modes, from point-to-point links to portable internet access[citation needed]. The technology provides up to 75 Mb/sec symmetric broadband speed without the need for cables. The technology is based on the IEEE 802.16 standard (also called Broadband Wireless Access). The name "WiMAX" was created by the WiMAX Forum, which was formed in June 2001 to promote conformity and interoperability of the standard. The forum describes WiMAX as "a standards-based technology enabling the delivery of last mile wireless broadband access as an alternative to cable and DSL".[1]
Wireless LAN
A wireless LAN or WLAN or wireless local area network is the linking of two or more computers or devices using spread-spectrum or OFDM modulation technology based to enable communication between devices in a limited area. This gives users the mobility to move around within a broad coverage area and still be connected to the network.
For the home user, wireless has become popular due to ease of installation, and location freedom with the gaining popularity of laptops. Public businesses such as coffee shops or malls have begun to offer wireless access to their customers; some are even provided as a free service. Large wireless network projects are being put up in many major cities. Google is even providing a free service to Mountain View, California[1] and has entered a bid to do the same for San Francisco.[2] New York City has also begun a pilot program to cover all five boroughs of the city with wireless Internet access
For the home user, wireless has become popular due to ease of installation, and location freedom with the gaining popularity of laptops. Public businesses such as coffee shops or malls have begun to offer wireless access to their customers; some are even provided as a free service. Large wireless network projects are being put up in many major cities. Google is even providing a free service to Mountain View, California[1] and has entered a bid to do the same for San Francisco.[2] New York City has also begun a pilot program to cover all five boroughs of the city with wireless Internet access
LAN - Local Area Network
Definition: A local area network (LAN) supplies networking capability to a group of computers in close proximity to each other such as in an office building, a school, or a home. A LAN is useful for sharing resources like files, printers, games or other applications. A LAN in turn often connects to other LANs, and to the Internet or other WAN.
Most local area networks are built with relatively inexpensive hardware such as Ethernet cables, network adapters, and hubs. Wireless LAN and other more advanced LAN hardware options also exist.
Specialized operating system software may be used to configure a local area network. For example, most flavors of Microsoft Windows provide a software package called Internet Connection Sharing (ICS) that supports controlled access to LAN resources.
The term LAN party refers to a multiplayer gaming event where participants bring their own computers and build a temporary LAN.
Also Known As: local area network
Examples: The most common type of local area network is an Ethernet LAN. The smallest home LAN can have exactly two computers; a large LAN can accommodate many thousands of computers. Many LANs are divided into logical groups called subnets. An Internet Protocol (IP) "Class A" LAN can in theory accommodate more than 16 million devices organized into subnets.
Most local area networks are built with relatively inexpensive hardware such as Ethernet cables, network adapters, and hubs. Wireless LAN and other more advanced LAN hardware options also exist.
Specialized operating system software may be used to configure a local area network. For example, most flavors of Microsoft Windows provide a software package called Internet Connection Sharing (ICS) that supports controlled access to LAN resources.
The term LAN party refers to a multiplayer gaming event where participants bring their own computers and build a temporary LAN.
Also Known As: local area network
Examples: The most common type of local area network is an Ethernet LAN. The smallest home LAN can have exactly two computers; a large LAN can accommodate many thousands of computers. Many LANs are divided into logical groups called subnets. An Internet Protocol (IP) "Class A" LAN can in theory accommodate more than 16 million devices organized into subnets.
Wireless Optical Mesh Solution Network
ClearMesh Networks Wednesday launched a wireless optical mesh solution designed to fill the gap between copper, RF and fiber in delivering 5mbps to 100mbps services to small and midsized businesses.
“There isn’t a cost-effective way for carriers today to extend fiber to SMBs,” said Fima Vaisman, ClearMesh’s senior vice president of marketing, explaining their monthly spend of $500 to $1,000 does not support a fiber trench where it is not already available. “What we provide is a solution that extends the fiber core without having to trench fiber.”
It also provides higher bandwidth than do copper and RF solutions, such as Wi-Fi and WiMAX, he said. “If a customer needs more bandwidth and they are looking for an SLA, we think there is a gap between those solutions provided at the entry level by WiMAX and Wi-Fi, and the high-end level by fiber. There is a gap in the middle. That is the gap we are trying to serve.”
Available immediately, the ClearMesh Metro Grid solution includes the ClearMesh 300 node, which can be mounted on a pole or rooftop, and the ClearMesh Management System, which provides tools for installation, diagnostics, service analysis and provisioning. The ClearMesh 300 node combines wireless and optical technologies with a Layer 2 mesh architecture to deliver business-grade Ethernet.
“The ClearMesh 300 Node is a switching platform,” explained Vaisman. “It has an Ethernet switch with 2-gigabit Ethernet capacity. Four of the Ethernet ports are copper and they are connected to optical transceivers.”
The optical transceivers, he said, are LED-based, which gives them a wider beam than systems using lasers, like free-space optics. “What that allows the product to do is be installed on a light pole as well as on top of a building,” said Vaisman. “A laser product cannot be installed on a light pole because the light pole has too much vibration, too much movement. The product wouldn’t stay locked on. With the product we have the light beams are locked on and stay locked on using automatic tracking whether on a light pole or building. With that you have a much broader ability to deploy a mesh in a metro area. If the device moves, the light cone still hits the other node.”
Each node has three optical transceivers, which operate on the license-free 850nm light band and reach 250 meters. Each transceiver is motorized, so it can move independently up and down, and 360 degrees around. “This allows each node to see three other nodes. Using that, we create a mesh,” said Vaisman, explaining the mesh requires one node to be fiber-feed, and several nodes can be fed from the same fiber to increase the capacity delivered into the mesh.
The ClearMesh node lists for $6,000, and less in volume. Considering installation costs, the company uses $5,000 per node in its ROI calculations. In contrast to trenching fiber, ClearMesh can cover seven buldings in a MetroGrid network for $35,000 in a matter of days while the fiber deployment over the same area will cost $180,000 and take months to install, he said. With a single customer per building and a single T1 replacement at $500 per month, the payback is 10 months, Vaisman said, adding a more realistic scenario is three customers per building paying $750 per month for a 10mbps service for an ROI of two months.
Yankee Group Analyst Tara Howard agrees that the ClearMesh solution serves “as a logical extension of a fiber network,” but she questions the market potential, discounting its appeal to Tier 1 companies that are laying fiber. “The opportunity is going to be with local LECs and municipalities,” she said, adding the fact that it does not compete with Wi-Fi or WiMAX is a plus.
“We don’t do what Wi-Fi does; we don’t offer mobility,” said Vaisman. “We don’t do what WiMAX does; we don’t offer five-mile reach. In a dense metro area, we offer high bandwidth and the ability to sign SLAs without any interference,” he said. The systems offers latency at one-tenth of 1ms, so 10 nodes equals 1ms of delay.
“There isn’t a cost-effective way for carriers today to extend fiber to SMBs,” said Fima Vaisman, ClearMesh’s senior vice president of marketing, explaining their monthly spend of $500 to $1,000 does not support a fiber trench where it is not already available. “What we provide is a solution that extends the fiber core without having to trench fiber.”
It also provides higher bandwidth than do copper and RF solutions, such as Wi-Fi and WiMAX, he said. “If a customer needs more bandwidth and they are looking for an SLA, we think there is a gap between those solutions provided at the entry level by WiMAX and Wi-Fi, and the high-end level by fiber. There is a gap in the middle. That is the gap we are trying to serve.”
Available immediately, the ClearMesh Metro Grid solution includes the ClearMesh 300 node, which can be mounted on a pole or rooftop, and the ClearMesh Management System, which provides tools for installation, diagnostics, service analysis and provisioning. The ClearMesh 300 node combines wireless and optical technologies with a Layer 2 mesh architecture to deliver business-grade Ethernet.
“The ClearMesh 300 Node is a switching platform,” explained Vaisman. “It has an Ethernet switch with 2-gigabit Ethernet capacity. Four of the Ethernet ports are copper and they are connected to optical transceivers.”
The optical transceivers, he said, are LED-based, which gives them a wider beam than systems using lasers, like free-space optics. “What that allows the product to do is be installed on a light pole as well as on top of a building,” said Vaisman. “A laser product cannot be installed on a light pole because the light pole has too much vibration, too much movement. The product wouldn’t stay locked on. With the product we have the light beams are locked on and stay locked on using automatic tracking whether on a light pole or building. With that you have a much broader ability to deploy a mesh in a metro area. If the device moves, the light cone still hits the other node.”
Each node has three optical transceivers, which operate on the license-free 850nm light band and reach 250 meters. Each transceiver is motorized, so it can move independently up and down, and 360 degrees around. “This allows each node to see three other nodes. Using that, we create a mesh,” said Vaisman, explaining the mesh requires one node to be fiber-feed, and several nodes can be fed from the same fiber to increase the capacity delivered into the mesh.
The ClearMesh node lists for $6,000, and less in volume. Considering installation costs, the company uses $5,000 per node in its ROI calculations. In contrast to trenching fiber, ClearMesh can cover seven buldings in a MetroGrid network for $35,000 in a matter of days while the fiber deployment over the same area will cost $180,000 and take months to install, he said. With a single customer per building and a single T1 replacement at $500 per month, the payback is 10 months, Vaisman said, adding a more realistic scenario is three customers per building paying $750 per month for a 10mbps service for an ROI of two months.
Yankee Group Analyst Tara Howard agrees that the ClearMesh solution serves “as a logical extension of a fiber network,” but she questions the market potential, discounting its appeal to Tier 1 companies that are laying fiber. “The opportunity is going to be with local LECs and municipalities,” she said, adding the fact that it does not compete with Wi-Fi or WiMAX is a plus.
“We don’t do what Wi-Fi does; we don’t offer mobility,” said Vaisman. “We don’t do what WiMAX does; we don’t offer five-mile reach. In a dense metro area, we offer high bandwidth and the ability to sign SLAs without any interference,” he said. The systems offers latency at one-tenth of 1ms, so 10 nodes equals 1ms of delay.
Wirelss Wide Area Network
Wirelss Wide Area Network A WWAN differs from a WLAN (wireless LAN) in that it uses Mobile telecommunication cellular network technologies such as WIMAX (though it's better applicated into WMAN Networks), UMTS, GPRS, CDMA2000, GSM, CDPD, Mobitex, HSDPA or 3G to transfer data. It can use also LMDS and Wi-Fi to connect to the Internet. These cellular technologies are offered regionally, nationwide, or even globally and are provided by a wireless service provider for a monthly usage fee.[1] WWAN connectivity allows a user with a laptop and a WWAN card to surf the web, check email, or connect to a Virtual Private Network (VPN) from anywhere within the regional boundaries of cellular service. Various computers now have integrated WWAN capabilities (Such as HSDPA in Centrino). This means that the system has a cellular radio (GSM/CDMA) built in, which allows the user to send and receive data. There are two basic means that a mobile network may use to transfer data:
Packet-switched Data Networks (GPRS/CDPD)
Circuit-switched dial-up connections
Since radio communications systems do not provide a physically secure connection path, WWANs typically incorporate encryption and authentication methods to make them more secure. Unfortunately some of the early GSM encryption techniques were flawed, and security experts have issued warnings that cellular communication, including WWANs, is no longer secure.[2] UMTS(3G) encryption was developed later and has yet to be broken.
Examples of providers for WWAN include Sprint Nextel, Verizon, and AT&T.
Packet-switched Data Networks (GPRS/CDPD)
Circuit-switched dial-up connections
Since radio communications systems do not provide a physically secure connection path, WWANs typically incorporate encryption and authentication methods to make them more secure. Unfortunately some of the early GSM encryption techniques were flawed, and security experts have issued warnings that cellular communication, including WWANs, is no longer secure.[2] UMTS(3G) encryption was developed later and has yet to be broken.
Examples of providers for WWAN include Sprint Nextel, Verizon, and AT&T.
Friday, November 28, 2008
Wireless WAN Solutions
Extend your network infrastructure with long range
outdoor wireless Ethernet connections
Trango's long range fixed wireless broadband Ethernet equipment is ideal for all types of wireless wide area network (WWAN) and wireless local area network (WLAN) applications. Trango outdoor wireless networking solutions allow you to quickly, easily, and cost effectively deploy reliable, high-speed, secure wireless IP connections between multiple remote locations at distances up to 45+ miles, and enable you to eliminate your costly leased lines and avoid expensive time consuming fiber trenching.
Wireless WAN Applications
Wireless WAN applications are endless for Trango long-range wireless Ethernet bridges. For example, a business may need to link its IT infrastructure to a few outlying buildings; a university or any school may need to provide internet access to dormitories or other buildings across campus; or a hospital may need to establish a secure link to a clinic across town so that doctors may securely exchange patient information over a high-speed connection.
Whether you need to a network connection across the street, across town, or from urban to rural areas, Trango wireless WAN/LAN building-to-building outdoor networks are ideal for any private enterprise or network operator that requires high-speed connectivity between two or more remote locations. Trango long range wireless wide area network (WWAN) solutions are well suited for a wide variety of industries and applications because they deliver high-capacity bandwidth, are extremely reliable, highly secure, and can be established with minimal effort and cost.
Licensed Point-to-Point Wireless WAN Radios
* TrangoLINK Giga® is a split-architecture (ODU/IDU) full duplex RF microwave system link that is both native Ethernet and native-TDM.
* TrangoLINK® Apex is an all-outdoor full duplex RF microwave radio that is native-Ethernet for 100% IP traffic.
* ATLAS 4900™ is an all-outdoor native Ethernet OFDM 4.9 GHz wireless bridge that operates in the licensed Public Safety band.
Unlicensed Point-to-Point Wireless WAN Radios
* TrangoLINK-45™ is an all-outdoor, native Ethernet, multi-band OFDM wireless Ethernet bridge that is capable of operation in 4 different 5 GHz bands (5.2, 5.3, 5.4, 5.8 GHz).
* TrangoLINK-10™ is an all-outdoor, native Ethernet 5.8 GHz wireless bridge.
Unlicensed Point-to-MultiPoint Wireless WAN Radios
For delivering point-to-multipoint (PtMP) broadband access wireless WAN connectivity from a central office to many remote offices, Trango offers these robust solutions.
* Access5830™ System 5.8 GHz broadband wireless access system delivers up to 10 Mbps up to 18 miles.
* Trango M2400S™ 2.4 GHz broadband wireless access system delivers up to 5 Mbps up to 25 miles.
* Trango M900S™ 900 MHz broadband wireless access system delivers up to 3 Mbps up to 20 miles.
outdoor wireless Ethernet connections
Trango's long range fixed wireless broadband Ethernet equipment is ideal for all types of wireless wide area network (WWAN) and wireless local area network (WLAN) applications. Trango outdoor wireless networking solutions allow you to quickly, easily, and cost effectively deploy reliable, high-speed, secure wireless IP connections between multiple remote locations at distances up to 45+ miles, and enable you to eliminate your costly leased lines and avoid expensive time consuming fiber trenching.
Wireless WAN Applications
Wireless WAN applications are endless for Trango long-range wireless Ethernet bridges. For example, a business may need to link its IT infrastructure to a few outlying buildings; a university or any school may need to provide internet access to dormitories or other buildings across campus; or a hospital may need to establish a secure link to a clinic across town so that doctors may securely exchange patient information over a high-speed connection.
Whether you need to a network connection across the street, across town, or from urban to rural areas, Trango wireless WAN/LAN building-to-building outdoor networks are ideal for any private enterprise or network operator that requires high-speed connectivity between two or more remote locations. Trango long range wireless wide area network (WWAN) solutions are well suited for a wide variety of industries and applications because they deliver high-capacity bandwidth, are extremely reliable, highly secure, and can be established with minimal effort and cost.
Licensed Point-to-Point Wireless WAN Radios
* TrangoLINK Giga® is a split-architecture (ODU/IDU) full duplex RF microwave system link that is both native Ethernet and native-TDM.
* TrangoLINK® Apex is an all-outdoor full duplex RF microwave radio that is native-Ethernet for 100% IP traffic.
* ATLAS 4900™ is an all-outdoor native Ethernet OFDM 4.9 GHz wireless bridge that operates in the licensed Public Safety band.
Unlicensed Point-to-Point Wireless WAN Radios
* TrangoLINK-45™ is an all-outdoor, native Ethernet, multi-band OFDM wireless Ethernet bridge that is capable of operation in 4 different 5 GHz bands (5.2, 5.3, 5.4, 5.8 GHz).
* TrangoLINK-10™ is an all-outdoor, native Ethernet 5.8 GHz wireless bridge.
Unlicensed Point-to-MultiPoint Wireless WAN Radios
For delivering point-to-multipoint (PtMP) broadband access wireless WAN connectivity from a central office to many remote offices, Trango offers these robust solutions.
* Access5830™ System 5.8 GHz broadband wireless access system delivers up to 10 Mbps up to 18 miles.
* Trango M2400S™ 2.4 GHz broadband wireless access system delivers up to 5 Mbps up to 25 miles.
* Trango M900S™ 900 MHz broadband wireless access system delivers up to 3 Mbps up to 20 miles.
Subscribe to:
Posts (Atom)
Posts
